WEST SYSTEM* EPOXY WEST SYSTEM brand epoxy is unique in that it is based around one resin with four different hardeners and six different fillers all of which can be mixed and matched to your specific application. Refer to the charts below as a guide when selecting the appropriate hardeners and fillers to meet your needs. The WEST SYSTEM User Manual and Product Guide is available upon request with any CST purchase. The letter designation following the item number is a size designation i.e. if you order an A size resin, the corresponding hardener will also be A size. WEST SYSTEM epoxy and hardeners have an excellent shelf-life when stored in sealed containers at room temperature. It is specifically designed to wet out and bond with wood, fiberglass, reinforcing fabrics and a variety of metals. When fully cured, WEST SYSTEM sands to a fine white powder.
HARDENER
APPLICATION
HARDENER TEMP RANGE (F) (Room Temp = 72)
Mixed
Viscosity
cPs
Cure Speeds at RT.
MINI
PUMP
(mixed ratio
by vol.)
Pot Life
100g
in pot
Working Time
thin film
Cured to Solid
thin film
40
50
60
70
80
90
100
205
Bonding
& Coating
975
9-12
min.
60-70
min.
6-8
hours
301
(5:1)
206
Bonding
& Coating
725
20-25
min.
90-110
min.
10-15
hours
301
(5:1)
207
Clear
Coating
775
22-27
min.
110-130
min
12-18
hours
303
(3:1)
209
Bonding
& Coating
725
40-50
min.
3-4
hours
20-24
hours
303
(3:1)
Note: Epoxy cures faster in warmer temperratures and in thicker applications –
Epoxy cures slower in cooler temperatures and in thinner appllications.
* Trademark of Gougeon Brothers, Inc. U.S.A.
West System Product Guide and Technical Manual FREE with purchase.
L504
$1.00
West System Metering Pumps 300 Pump Set are designed for convenient and accurate metering of all Group Size A, B and C West System resin and hardeners. The Pump Set contains one resin pump and two hardener pumps. Pumps mount directly on the resin and hardener containers an eliminate the mess of measuring by weight or volume. The pumps are calibrated to deliver the proper working ratio. One full pump stroke of the resin pump and one full stroke of the hardener pump delivers .8 fl. oz. for the 105/205 or 105/206 combinations or .9 fl. oz for the 105/207 or 105/209 mixtures.
A300
$12.55
Small Batch Scale Kit Includes scale accurate to 0.1 g graduation, 150 g, 4.4 fluid oz capacity, dispensing bottles, mixing cups & sticks.
A320
$39.39
WEST SYSTEM LAMINATING EPOXY RESIN
West System - 105 Resin, 1 Quart A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-A
$34.95
West System - 105 Resin, .98 Gallon A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-B
$91.95
West System - 105 Resin, 4.35 Gallon A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-C
$347.55
WEST SYSTEM LAMINATING EPOXY HARDENERS
West System - 205 Hardener, Fast Cure, .44 Pint 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-A
$17.05
West System - 205 Hardener, Fast Cure, .86 Quart 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-B
$37.55
West System - 205 Hardener, Fast Cure, .94 Gallon 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-C
$129.85
West System - 206 Hardener, Slow Cure, .44 Pint 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY)
A206-A
$17.05
West System - 206 Hardener, Slow Cure, .86 Quart 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY)
A206-B
$37.55
West System - 206 Hardener, Slow Cure, .94 Gallon 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A206-C
$129.85
West System - 207 Hardener, Special Coating, .66 Pint 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. (Standard Ground Shipping US ONLY)
A207-A
$33.95
West System - 207 Hardener, Special Coating, .33 Gallon 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A207-B
$73.17
West System - 207 Hardener, Special Coating, 1.45 Gallon 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A207-C
$234.82
$206.85
On Sale!
West System - 209 Hardener, Extra Slow Cure, .66 Pint 209 Extra Slow Hardener is formulated for use with West System Brand 105 Resin for general coating and bonding applications in extreamly warm and humid conditions or when extended working time is needed at room temperature. Forms a clear, amber colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating. Pot life at 72 F is 40 to 50 minutes. Cures to a solid in 20 to 24 hours. Do not use below 70 F. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. (Standard Ground Shipping US ONLY)
A209-A
$29.55
West System - 209 Hardener, Extra Slow Cure, .33 Gallon 209 Extra Slow Hardener is formulated for use with West System Brand 105 Resin for general coating and bonding applications in extreamly warm and humid conditions or when extended working time is needed at room temperature. Forms a clear, amber colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating. Pot life at 72 F is 40 to 50 minutes. Cures to a solid in 20 to 24 hours. Do not use below 70 F. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. (Standard Ground Shipping US ONLY)
A209-B
$65.55
West System - 209 Hardener, Extra Slow Cure, 1.45 Gallon 209 Extra Slow Hardener is formulated for use with West System Brand 105 Resin for general coating and bonding applications in extreamly warm and humid conditions or when extended working time is needed at room temperature. Forms a clear, amber colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating. Pot life at 72 F is 40 to 50 minutes. Cures to a solid in 20 to 24 hours. Do not use below 70 F. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A209-C
$213.55
REPAIR PACKS & 5 MINUTE EPOXY
West System - Handy Repair Pack Everything you need to complete small repairs. The Handy Repair Pack contains West System 105 Resin and 205 Hardener (Fast 10 Minute Pot life) packets and enough filler to complete a variety of coating and bonding repairs. Also included is a 2" x 10" piece of 9 oz fiberglass tape, useful for patching and reinforcing. An application brush, mixing stick, pipe cleaner, two cleaning pads and instructions. (Standard Ground Shipping US ONLY)
A101
$12.23
West System - G/5 5 Minute Epoxy, 8 oz. Set Easy to use, 2 part resin/hardener system for quick repairs, tooling and general bonding. Bonds to wood, fiberglass and metal. One-to-one mixture, no pumps are required. Cures in 3 to 5 minutes. Ground Shipping US Only
A865-4
$17.73
West System - G/5 5 Minute Epoxy, 32 oz. Set Easy to use, 2 part resin/hardener system for quick repairs, tooling and general bonding. Bonds to wood, fiberglass and metal. One-to-one mixture, no pumps are required. Cures in 3 to 5 minutes. Ground Shipping US Only
A865-16
$49.15
Prices are in US dollars and subject to change without notice.
