CST Chopped Graphite 0.125" fiber length, approx. 2 oz.
A4001
$7.95
Carbon Wrapped Tube, 0.5" ID Price per foot 0.030" WT, 15 g./ft.
T150
$16.95
$13.56
On Sale!
Carbon Braided Sleeve, 0.5" Dia., 1-9 ft.
1.57" Circ., 0.12 oz./ft., 3k. Price per foot when ordering 1-9 ft.
C9311
$2.95
Carbon Micro Rods, 0.500" Price per Foot weight 59 grams per foot
T250
$14.65
Rohacell 71, 12.7mm 6" x 24"
R7112
$28.95
End Grain Balsa 0.5" thick, 2-7 sq. ft. Price per square foot when ordering 2-7 sq. ft.
B155
$11.95
West System - 105 Resin, 1 Quart A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-A
$34.95
West System - 205 Hardener, Fast Cure, .44 Pint 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-A
$17.05
West System - 206 Hardener, Slow Cure, .44 Pint 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY)
A206-A
$17.05
West System - 209 Hardener, Extra Slow Cure, .66 Pint 209 Extra Slow Hardener is formulated for use with West System Brand 105 Resin for general coating and bonding applications in extreamly warm and humid conditions or when extended working time is needed at room temperature. Forms a clear, amber colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating. Pot life at 72 F is 40 to 50 minutes. Cures to a solid in 20 to 24 hours. Do not use below 70 F. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. (Standard Ground Shipping US ONLY)
A209-A
$29.55
$23.85
On Sale!
West System Metering Pumps 300 Pump Set are designed for convenient and accurate metering of all Group Size A, B and C West System resin and hardeners. The Pump Set contains one resin pump and two hardener pumps. Pumps mount directly on the resin and hardener containers an eliminate the mess of measuring by weight or volume. The pumps are calibrated to deliver the proper working ratio. One full pump stroke of the resin pump and one full stroke of the hardener pump delivers .8 fl. oz. for the 105/205 or 105/206 combinations or .9 fl. oz for the 105/207 or 105/209 mixtures.
A300
$12.55
Reusable Mixing Sticks, 8/pkg. Both ends are beveled. Rounded end shapes a 3/8" radius fillets easily use the square end for thorough mixing of epoxy and blending of fillers.
A804-8
$2.45
8 oz. Poly Mixing Pot Reusable
A5001
$0.45
1/2" Glue Brushes, 12/pkg. Disposable brushes
A803-12
$4.75
Disposable Gloves, 4 pr./pkg.
A832-4
$5.03
Nylon Bagging Tube 18" wide , 3 yd. pkg.
V111
$5.95
Breather Strip 2" wide x 12 ft
V300
$2.95
Tacky Seal, 25 ft./roll, 1-9 rolls 0.5" wide, 0.125" thick, Temperature RT to 225° F. Price per roll when ordering 1-9 rolls
V196
$7.95
Teflon Coated Glass, 38" Wide, RT. to 550° F, 2 yd. pkg. Very porous, thin. Yields finely textured surface for secondry bonding.
V231
$24.95
Insta-Flex Gap Filler (Pink Cap), 1 oz. A clear rubber toughened CA with similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of the IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. INSTA-FLEX is superior in strength to standard CA but a little lower in strength compared to our IC-2000. When a joint is a larger than normal gap, flexible CA's provide superior shock resistant bonds.
A2120
$5.99
IC 2000 (Burgandy Cap), 1 oz. A rubber toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberghlass, rubber, carbon fiber and advanced materials. For model use IC-2000 is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET. When cured, IC-2000 is pliable enough to be carved with a hobby knife. IC-2000 is the best adhesive for R/C car tires.
A2000
$7.99
Prices are in US dollars and subject to change without notice.
